Products Category

Name: Wafer Sensor
E-mail: sales@wafer-sensor.com
Add: No.645 Sherbrooke St West Montreal. Que. H4A 3T4 Canada

Products > Meter

GS3 Ruggedized Soil Moisture, Temperature, & Electrical Conductivity Sensor

Product name：GS3 Ruggedized Soil Moisture, Temperature, & Electrical Conductivity Sensor

Item：GS3

Details：

Description

The GS3 soil moisture, temperature, and EC sensor is built with an epoxy body and stainless steel needles. The internal circuitry is the same cutting edge design that you’ll find in other METER soil moisture sensors, but the form factor has been optimized for use in soilless substrates or harsh environments, giving it a wider range of EC measurement and an increased temperature range. Not only do the steel needles improve sensor contact, but they also improve the sensor’s ability to measure EC in porous substrates such as peat or perlite.

Accuracy at a fraction of the cost

The GS3 measures water content, temperature, and EC independently. Its 70 MHz frequencyminimizes salinity and textural effects, making it accurate in most soil or soilless media. Stainless steel needles have an extended surface area to optimize EC measurements, while minimizing substrate disturbance during insertion. Temperature is measured with an onboard thermistor, and electrical conductivity is measured using a stainless steel electrode array.

Understand your measurements

When used with our DataTrac 3 software, your GS3 data can be used to determine plant available water, growing degree days, and pore water electrical conductivity.

Easy integration

Each GS3 comes standard with both serial and SDI-12 communication options, meaning easy integration with systems manufactured by other companies.

Advantages of the GS3

· Measure VWC, EC, and temperature in soilless substrates or harsh environments

· Manage salts

· SDI-12 compatible

Specifications

ACCURACY	Apparent Dielectric Permittivity (εa): ± 1 εa (unitless) from 1 – 40 (soil range), ± 15% from 40 – 80 Soil Volumetric Water Content (VWC): Using a generic calibration: ± 0.03 m³/m³ (± 3% VWC) typical in mineral soils that have solution electrical conductivity < 10 dS/m; using medium specific calibration, ± 0.01 – 0.02 m³/m³ (± 1 – 2% VWC) in any porous medium Electrical Conductivity (EC): ± 5% from 0 to 5 dS/m, ± 10% from 5-10 dS/m, 10-23 dS/m custom calibration required Temperature: ± 1 °C Note: Temperature measurement may not be accurate if sensor is not fully immersed in the medium of interest, due to excessively long equilibration time.
RESOLUTION	εa: 0.1 εa (unitless) from 1 – 20, < 0.75 εa (unitless) from 20 – 80 VWC: 0.002 m³/m³ (0.2% VWC) from 0 to 40% VWC, 0.001 m³/m³(0.1% VWC) > 40% VWC EC: 0.001 dS/m from 0 to 23 dS/m Temperature: 0.1 °C
RANGE	εa: 1 (air) to 80 (water) EC: 0 – 25 dS/m (bulk) Temperature: -40 to 60 °C* *Sensors can be used at higher temperatures under some conditions. Contact METER for more details.
MEASUREMENT SPEED	150 ms (milliseconds)
SENSOR TYPE	VWC: Frequency domain EC: Two probe design Temperature: Thermistor
OUTPUT	Serial TTL, 3.6 Volt Levels or SDI-12
OPERATING ENVIRONMENT	-40 °C to 60 °C
POWER	3.6 – 15 VDC, 0.3 mA quiescent, 25 mA during 150 ms measurement
CABLE LENGTH	Sensors come standard with 5 m cable. Custom cable lengths available. Maximum cable length of 75 m. Please contact METER if you need longer cable lengths.
CABLE CONNECTOR TYPES	3.5 mm “stereo” plug, or stripped and tinned lead wires (3)
SENSOR DIMENSIONS	9.3 cm x 2.4 cm x 6.5 cm
DATA LOGGER COMPATIBILITY (NOT EXCLUSIVE)	METER EM50 Series, ProCheck, Campbell Scientific
WARRANTY	One year, parts and labor